FMS Atlas 6x6 SOA Conversion

Descripción

Relocates steering servo to axle on FMS 1/18 Atlas 6x6. This kit requires you to swap steering knuckles (Left to right and right to left) to opposite sides and removes the panhard bar. This system is modeled after the SCX24 steering link and will eliminate bump steer. I trimmed the stock servo mount to keep the front crossmember. ------------- UPDATE 3/22/24 ---------------- added updated 2 piece draglink. Print 2 of them flat with no supports and 100% infil . Thread a 1.3 mm SCX24 screw into one half, cut off the head and tread on the second end for strength. Also added in ESC relocation tray. I installed this with a small amount of CA glue to the frame rails.