RV Cabinet Clamp V2 Improved

Descripción

The original clamps from the Roadtrek and other trailers and rv's cabinets kept breaking so I decided to create a foolproof version with no weak spots. Please make sure to remove all support material because of tight tolerances. It is designed to work with a variety of springs including the ones from office pens. It is kept in place with a section of paperclip or any wire (or small screw) in the back which can be bent with pliers or hand instead of the plastic clips on the originals that break constantly. Print time Circa 1:30 hours for FDM Thank you for checking out my creation! Please give any feedback as I'm constantly trying to improve! Instructions: 1~ Print 2~ Remove ALL support material for smooth operation 3~ Acquire a spring from office pen (or other source) 4~ Place spring in the dugout section in the pieces 5~while pressing the clamp closed, insert section of paperclip/wire in the opening at the back of the housing to keep in the lever. (a small screw can also work) 6~mount on cabinet to align with original holes and enjoy a working cabinet:)