tamiya grasshopper suspension upgrade

Descripción

the front lower control arms that have been stretched 15mm per side and made to accept bandit knuckles with some custom made tie rods. they do require relatively narrow shocks so i cant guarantee fitment with any specific shock. but i believe 12mm diameter and 70mm center to center should work. the front upper shock mount/ brace connects the stock shock mounts and gives mounting holes for the shocks the new upper control arm is attached to the bumper mounts the rear is made up of new lower frame adapter and lower y link. the upper links are short tie rods. the y link uses a m3 screw in the ball and an m4 screw to attach to the y link. not perfect but seams to work ok so far =]