Vacuum Cleaner Nozzle – One Touch Lock Attachment (Compatible with Shark® Ninja® Models)

Descripción

This is a 3D printable vacuum nozzle designed as a universal DIY accessory. It has been test-fitted on vacuum cleaners that normally accept the Shark® Ninja® nozzle with part number 3957FFJ360J. ⭐ Key Features: - Inner diameter approx. 10 mm, ideal for cleaning tight and narrow spaces - Great for keyboards, window tracks, car interiors, and other small areas - Designed to fit with the one-touch lock mechanism used in Shark® Ninja® nozzles, allowing the attachment to stay securely in place - Lightweight, practical, and easy to print (supports not required in our test) - STL file ready for 3D printing ⚙ Settings and Manufacturing Instructions: - Successfully printed using JLCPCB resin printing service - For FDM printers, general recommended settings are: • Layer height: 0.2 mm • Infill: 20–30% • Material: PLA or PETG (ABS/resin may also work) • Supports: not required in our test design, but may vary depending on your setup ⚠ Notes: - This is an original, third-party design. It is not an official Shark® or Ninja® product. - Brand names and model numbers are mentioned only to indicate compatibility. - Printing results may vary depending on your printer, material, and slicer settings. - By downloading and using this model, you agree that it is used **at your own risk**. The designer takes no responsibility for any damage or issues arising from its use. This is a 3D printable vacuum nozzle designed as a universal DIY accessory. It has been test-fitted on vacuum cleaners that normally accept the Shark® Ninja® nozzle with part number 3957FFJ360J. ⭐ Key Features: - Inner diameter approx. 10 mm, ideal for cleaning tight and narrow spaces - Great for keyboards, window tracks, car interiors, and other small areas - Designed to fit with the one-touch lock mechanism used in Shark® Ninja® nozzles, allowing the attachment to stay securely in place - Lightweight, practical, and easy to print (supports not required in our test) - STL file ready for 3D printing ⚙ Settings and Manufacturing Instructions: - Successfully printed using JLCPCB resin printing service - For FDM printers, general recommended settings are: • Layer height: 0.2 mm • Infill: 20–30% • Material: PLA or PETG (ABS/resin may also work) • Supports: not required in our test design, but may vary depending on your setup ⚠ Notes: - This is an original, third-party design. It is not an official Shark® or Ninja® product. - Brand names and model numbers are mentioned only to indicate compatibility. - Printing results may vary depending on your printer, material, and slicer settings. - By downloading and using this model, you agree that it is used **at your own risk**. The designer takes no responsibility for any damage or issues arising from its use. - The installation method is the same as in my other design (Design number 3526536). Please refer to that listing for a demonstration video. https://youtube.com/shorts/KDX4s_xN8yU?feature=share